How to convert AMR to MP3 on any computer

You have an old AMR voice note and a computer that will not open it. Here are the practical ways to turn it into an MP3, and which one to pick.

Before you start: what you need to know

AMR is a speech codec; MP3 is a general-purpose audio codec. Converting between them is straightforward, but it will not improve the recording. Set your expectations at "plays everywhere" rather than "sounds better", and you will not be disappointed.

For speech sourced from AMR-NB at 8 kHz, an MP3 bitrate of 96–128 kbps is already generous. For AMR-WB at 16 kHz, 128–192 kbps is plenty. Higher settings make the file bigger without adding detail that was never there.

Method 1: an in-browser converter

This is the quickest route and needs no installation. Open the AMR to MP3 tool, drop in your file, pick a bitrate and download the result. The conversion runs through WebAssembly inside the browser tab, so the recording is not uploaded to a server.

That last point matters more than it sounds. Many "free online converters" upload your file, process it on their infrastructure and hand it back. For a private conversation, that is a meaningful difference. The browser route also works the same on Windows, macOS and Linux — all you need is a reasonably current browser.

You can queue multiple files at once and download them together as a ZIP, which is useful if you are working through a folder of old voice notes.

Method 2: FFmpeg from the command line

If you are comfortable in a terminal, FFmpeg is the most flexible option and is free on every platform. Install it, then run:

ffmpeg -i input.amr -codec:a libmp3lame -b:a 128k output.mp3

For wideband files, change the input name to .awb. FFmpeg detects both automatically, so the command itself does not change. If you want to process a whole folder at once on macOS or Linux:

for f in *.amr; do ffmpeg -i "$f" -codec:a libmp3lame -b:a 128k "${f%.amr}.mp3"; done

On Windows PowerShell, the equivalent is a short loop using Get-ChildItem. FFmpeg is the right choice when you need to script a conversion, preserve specific metadata, or integrate the step into a larger workflow.

Method 3: VLC media player

VLC plays AMR and can also convert it. Open Media → Convert/Save, add your .amr file, choose Convert, select "Audio – MP3" as the profile and set a destination. Press Start and VLC will write an MP3.

The advantage is that VLC is a familiar application with a graphical interface. The downside is that the conversion profiles are less transparent than a command line — you may need to edit the profile to set an exact bitrate. For a handful of files this is fine; for a batch, use FFmpeg or the browser tool.

Method 4: Audacity

Audacity can import AMR if FFmpeg support is installed, after which you can edit the audio and export as MP3. This is the right route when you actually want to change something — trim silence, remove a section, or reduce noise — rather than simply change the format.

Import via File → Import → Audio, make your edits, then File → Export → Export as MP3. Audacity will ask for a bitrate; 128 kbps is a sensible choice for speech.

Which method should you choose?

  • One or two files, no installation: the browser converter.
  • Many files, repeatable process: FFmpeg.
  • You already have VLC: VLC's convert function.
  • You need to edit the audio: Audacity.

All four produce a normal MP3 that plays on any phone, car stereo or music app. Pick based on how much control you need, not on any supposed quality difference — the source recording sets the ceiling.

Troubleshooting common problems

A few things go wrong often enough to be worth naming. If the converted file is silent, the source AMR was probably empty or corrupt — try playing the original in VLC first to confirm. If it plays but only the first second comes through, the AMR header may be damaged, a common issue with files recovered from old memory cards.

If the output sounds distorted, the bitrate was set too low for a wideband source; raise it to 128 kbps. Conversely, a huge file with no improvement in sound means it was set too high for narrowband speech. And if a browser-based conversion fails on a large file, close other tabs — the engine needs memory, and a phone with little free RAM is the usual culprit.

After the conversion

Check that the result starts at the beginning and ends at the end; AMR files from old phones sometimes contain a short silent lead-in. If the volume is inconsistent across several recordings, run them through the loudness normaliser so they play at the same level. If you want a text version of what was said, the transcription tool accepts the original AMR directly — you do not need to convert first.

Related reading

Put it into practice

Every tool on this site runs locally in your browser. Convert AMR to MP3, transcribe to text, or see all tools.